Selecting the size of the tool box for a Toyota Tacoma is a bit tricky. I have added all the details for selecting a suitable product for your truck.
What Size Tool Box Fits a Toyota Tacoma? The standard and suitable size for the Toyota Tacoma tool box is length 62 inches, width 18 inches, and height 12 inches. You can place the tools in an organized manner and protect them from rust and dirt. The farmers, hunters, and construction workers will benefit from this by placing their necessary tools.
You can also store food products and clothes other than the tools. The primary purpose of this is storing tools, but you can also make partitions for clothing.
How do you measure a tool box for a Toyota Tacoma?
You will need a measuring tape, pen, and notepad for measuring the cargo bed for adding a toolbox.
First, measure the size and dimensions by following the given points carefully and note each reading on the notepad with the name height, width, and length.
Measure the distance between the bed rails
Take a measuring tape and put the zero ends at the lower corner of the cargo bed beside its walls. Then, open the tape and take it to the other corner, and note the reading.
Next, measure the size of the bed rails if you are willing to add it at the sides.
Height of bed wall
You should measure the height of the bed walls from the lower corner to the upper end. Then, subtract two to three inches from the total length to make the lower part of the box.
Suppose you will get 12 inches total length, and the final length of the box will be 8 to 9 inches. Then, subtract the one and a half to two inches from the subtracted value.
The remaining one and half and two inches will be the cover or lid. If you want to add upholstery on the upper side, subtract the two and a half inches from the total length. This is suitable for both long bed and short bed Tacoma.
Measure the width
The best and tricky way to measure the width of the toolbox is to measure the whole width of the bed.
Divide the measured value into 4 to 5 sections, and you will get the exact value for the width. If you add it to the backside of the seat, then the box’s width will be 18 to 22 inches.
How big a tool box can you add to a Toyota Tacoma?
The size of the tool box for this vehicle varies from generation to generation. The size of the box increases or decreases when the size of the cargo truck increases or decreases.
The ideal size for Toyota Tacoma is length 62 inches, width 18 inches, and height 12 inches. You can adjust the smaller size box as well that are available in the market.
You measure the exact size and order the manufacturer to make the suitable size that will fit perfectly.
Things to consider when selecting a tool box for your Toyota Tacoma
Here are essential things to consider when you are adding the toolbox to your Toyota Tacoma.
The first and foremost point is the size of the toolbox; it varies from model to model.
Therefore, before installation, it is better to measure the truck’s size, including length, width, and height from the backside. You can also buy the custom size and standard size from the online stores and the market.
You can choose a stylish and simple box for your truck. These are an available in-plane and stunning look that will increase the worth and value.
Some boxes are wider from the top, and some are wider from the lower side.
You should choose the best material for the box as it is exposed to the open air and environment. The iron and steel boxes are heavyweight and put a load on the bed.
The iron will rust soon as compared to the steel. Therefore, it is better to choose aluminum products because it is lightweight and has maximum weight holding capacity without bends and folds.
You should consider your convenience while you are adding it to the cargo bed. For example, the upper part of the box should be comfortable and relaxing when you sit on it.
It is better to add waterproof upholstery. Then, you will feel relaxed and comfortable when you sit on it.
Its material should be water-resistant because these are present in an open area.
There is nothing on the back of the Truck that will cover it. It will help in the rain during heavy rain and snowfall.
It should be durable and long-lasting. You spend money on a durable and high-quality material one time and use it for a more extended period.
You should search thoroughly in the market, read about different materials’ durability, and choose the best for your Toyota Tacoma.
Why would you add a tool box to Toyota Tacoma?
The addition of it in the truck depends on the need and requirement. It also depends on the person to person and preferences.
Some hunters prefer to go on the truck because they can go through the rough and grassy areas. The hunters put the hunting kit in it.
You can place a tree stand, skinning knife, gloves, binoculars, spotting scope, hunting boots, arrow, bows, and American rifle when you hunt in the forest or some other places.
Some people go fishing in their spare time, and few do it as a hobby.
The fisherman prefers to buy the Toyota Tundra because it has a large cargo bed and tool box for placement of gaffs, net, pulleys, rods, hooks, sinkers, floats, baits, lures, spears, waders, and tackle boxes.
The camping will require a reliable tent made of water-resistant material, a knife, rope, folding bag, camping chairs. It is better to place the small tools in the box and large on the cargo bed.
The farmers in America ride on the Toyota Tacoma because it has a large space to store tools in the box.
The farmer can store fork, spade, grape hoe, grass shears, pruning shears, rake, trowel, sickle, lawn rake, hedge shears, and many more in it as the boxes are lengthy. You can increase the width of the box at the time of installation according to the need.
You will need a toolbox as an essential part of the vehicle if you are an engineer and contrition worker. It is better to add it at the back of the truck if it is not available previously.
All the workers from different fields add this according to the requirement. You can add only one tool box at the back of the seats or any side with the wall of the cargo bed.
Many people prefer to add two or three small-sized boxes, two at the sides with the bed wall and one at the back of the seats. It depends on the demand of the customer and also on the job of the person.
The addition of the number of boxes in the vehicle provides space for sitting. It is better to choose the two or three boxes with standard width to sit on it comfortably.
Organize and secure tools
Many people like to add a toolbox to their truck as you can organize and save your tool in one place. In addition, it will save your time and money when you are on the way and need any equipment.
The chances of stealing decrease when you keep the tools in the box; otherwise, anyone can take your expensive high-quality instruments.
The one and most significant reason for adding boxes in the Toyota Tacoma is the protection of tools. You should place them in the closed body to protect them from rust, corrosion, moisture, and dust.
It protects not only the tools but also the truck from damage. When you put the tools on the bed openly, it will rub with the surface and hit the walls. Sometimes it can cause dents and scratches when you drive fast and stop suddenly.
The addition of it in the back of the vehicle is that you cannot forget the tools at home. It is better to place all the tools related to your work in it. In this way, you will not forget anything at home or office.
Many people prefer it to make the truck more stunning and appealing. Many customers buy it due to the large sitting area.
Which tools can you put in the tool box of Toyota Tacoma?
The manufacturer designed it to store many tools such as emergency tools, basic tools, and basic supplies. It also contains the weather equipment that will help you to go through the hilly areas and snowfall.
The emergency tools include:
- Jumper cable
- Aluminum flashlight of high quality
- Emergency flare
- First aid kit
- Fire extinguisher
- Tire inflator
- Pressure gauge
- Anti-rust spray
Basic tools include:
- Two straps
- Soft fabric
- Grease or kerosene oil for lubricating the spare part
Basic supplies include:
- Cable tie
- Duct tape
- Paper towel
- Measuring tape
- Bright color cloth or reflective triangle to cover the Toyota Tacoma
Sometimes you need repair tools when you are far away from the mechanic and workshop. The following kit will help you to repair the damaged part temporarily.
- Jack stand
- Socket adapter
- Breaker bar
- Torque wrenches
Many people place some special tools in the box when they are going to snowy areas and ready for a long tour, especially in winters. These are:
- Ice scraper
- Rain poncho
- Emergency towel
- Tow strap
- Tire chains
- Windshield washer fluids
- Cat litter for traction and blanket
- Warm clothing
Besides, you can also store food items that have a longer shelf life and lower water content in the box, such as nuts. Finally, put the cloth and rain shield in the box to protect them from dust and dirt.
How long does it take to change the Toyota Tacoma startup screen?
Details about the axle wrap on a truck
Is it true that Toyota Tundra will have a diesel engine?
Does Toyota Tundra has heated seats?
How to add 35 Inch Tires on a Dodge RAM 1500?
Can you fit Dodge RAM Wheels to Ford F150?
Why does Check Gauge light appear on Dodge RAM 1500?