Set-User (ExchangePowerShell) (2023)

  • Reference
Module:
ExchangePowerShell
Applies to:
Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-User cmdlet to modify user attributes. You can use this cmdlet to modify all objects that have user accounts (for example, user mailboxes, mail users, and user accounts).

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-User [-Identity] <UserIdParameter> [-AllowUMCallsFromNonUsers <AllowUMCallsFromNonUsersFlags>] [-Arbitration] [-AssistantName <String>] [-AuthenticationPolicy <String>] [-BlockCloudCache <Boolean>] [-CanHaveCloudCache <Boolean>] [-CertificateSubject <MultiValuedProperty>] [-City <String>] [-ClearDataEncryptionPolicy] [-Company <String>] [-Confirm] [-CountryOrRegion <CountryInfo>] [-CreateDTMFMap <Boolean>] [-Department <String>] [-DesiredWorkloads <MailboxWorkloadFlags>] [-DisplayName <String>] [-DomainController <Fqdn>] [-Fax <String>] [-FirstName <String>] [-Force] [-GeoCoordinates <GeoCoordinates>] [-HomePhone <String>] [-IgnoreDefaultScope] [-Initials <String>] [-LastName <String>] [-LinkedCredential <PSCredential>] [-LinkedDomainController <String>] [-LinkedMasterAccount <UserIdParameter>] [-Manager <UserContactIdParameter>] [-MobilePhone <String>] [-Name <String>] [-Notes <String>] [-Office <String>] [-OtherFax <MultiValuedProperty>] [-OtherHomePhone <MultiValuedProperty>] [-OtherTelephone <MultiValuedProperty>] [-Pager <String>] [-PermanentlyClearPreviousMailboxInfo] [-Phone <String>] [-PhoneticDisplayName <String>] [-PostalCode <String>] [-PostOfficeBox <MultiValuedProperty>] [-PublicFolder] [-RemotePowerShellEnabled <Boolean>] [-RemoveMailboxProvisioningConstraint] [-ResetPasswordOnNextLogon <Boolean>] [-SamAccountName <String>] [-SeniorityIndex <Int32>] [-SimpleDisplayName <String>] [-SkipDualWrite] [-StateOrProvince <String>] [-StreetAddress <String>] [-StsRefreshTokensValidFrom <DateTime>] [-TelephoneAssistant <String>] [-Title <String>] [-UMCallingLineIds <MultiValuedProperty>] [-UMDtmfMap <MultiValuedProperty>] [-UserPrincipalName <String>] [-VIP <Boolean>] [-WebPage <String>] [-WhatIf] [-WindowsEmailAddress <SmtpAddress>] [<CommonParameters>]

Description

The Set-User cmdlet contains no mail-related properties for mailboxes or mail users. To modify the mail-related properties for a user, you need to use the corresponding cmdlet based on the object type (for example, Set-Mailbox or Set-MailUser).

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-User -Identity Contoso\Jill -DisplayName "Jill Frank"

This example sets the display name for user Jill Frank.

Example 2

Set-User -Identity Kweku@fabrikam.com -LinkedMasterAccount $null

This example unlinks the linked mailbox Kweku@fabrikam.com and converts it to a user mailbox by setting the LinkedMasterAccount parameter to $null.

Performing this procedure on a linked mailbox removes all permissions on the mailbox such as Send As, Full Access, folder and calendar delegation.

Parameters

-AllowUMCallsFromNonUsers

This parameter is available only in on-premises Exchange.

The AllowUMCallsFromNonUsers parameter specifies whether to exclude the user from Unified Messaging directory searches.

Type:AllowUMCallsFromNonUsersFlags
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Arbitration

This parameter is available only in on-premises Exchange.

The Arbitration switch is required to modify arbitration mailboxes. You don't need to specify a value with this switch.

Arbitration mailboxes are system mailboxes that are used for storing different types of system data and for managing messaging approval workflow.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AssistantName

The AssistantName parameter specifies the name of the user's assistant.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-AuthenticationPolicy

The AuthenticationPolicy parameter specifies the authentication policy to apply to the user. You can use any value that uniquely identifies the policy. For example:

  • Name
  • Distinguished name (DN)
  • GUID

To remove the policy assignment for the user, use the value $null.

You create authentication policies with the New-AuthenticationPolicy cmdlet to block or selectively allow Basic authentication or (in Exchange 2019 CU2 or later) other legacy authentication methods.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2019, Exchange Online, Exchange Online Protection

-BlockCloudCache

This parameter is available only in the cloud-based service.

{{ Fill BlockCloudCache Description }}

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-CanHaveCloudCache

This parameter is available only in the cloud-based service.

{{ Fill CanHaveCloudCache Description }}

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-CertificateSubject

This parameter is available only in on-premises Exchange.

(Video) Connecting to Exchange Online in PowerShell

The CertificateSubject parameter specifies the value of the subject field of the user's digital certificate.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-City

The City parameter specifies the user's city.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ClearDataEncryptionPolicy

This parameter is available only in the cloud-based service.

{{ Fill ClearDataEncryptionPolicy Description }}

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-Company

The Company parameter specifies the user's company.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CountryOrRegion

The CountryOrRegion parameter specifies the user's country or region. A valid value is a valid ISO 3166-1 two-letter country code (for example, AU for Australia) or the corresponding friendly name for the country (which might be different from the official ISO 3166 Maintenance Agency short name).

A reference for two-letter country codes is available at Country Codes List.

The friendly name is returned in the CountryOrRegion property value by the Get-User cmdlet, but you can use either the friendly name or the two-letter country code in filter operations.

Type:CountryInfo
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CreateDTMFMap

This parameter is available only in on-premises Exchange.

The CreateDTMFMap parameter specifies whether to create a dual-tone multiple-frequency (DTMF) map for the recipient. This allows the recipient to be identified by using a telephone keypad in Unified Messaging (UM) environments. Valid values are:

  • $true: A DTMF map is created for the recipient. This is the default value.
  • $false: A DTMF map isn't created for the recipient.
Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Department

The Department parameter specifies the user's department.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DesiredWorkloads

This parameter is available only in the cloud-based service.

{{ Fill DesiredWorkloads Description }}

Type:Microsoft.Exchange.Data.MailboxWorkloadFlags
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-DisplayName

The DisplayName parameter specifies the display name of the user. The display name is visible in the Exchange admin center and in Active Directory. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Fax

The Fax parameter specifies the user's fax number.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-FirstName

The FirstName parameter specifies the user's first name.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Force

This parameter is available only in the cloud-based service.

The Force switch hides warning or confirmation messages. You don't need to specify a value with this switch.

You can use this switch to run tasks programmatically where prompting for administrative input is inappropriate.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-GeoCoordinates

The GeoCoordinates parameter specifies the user's location in latitude, longitude and (optionally) altitude coordinates. A valid value for this parameter uses one of the following formats:

  • Latitude and longitude: For example, "47.644125;-122.122411"
  • Latitude, longitude, and altitude: For example, "47.644125;-122.122411;161.432"

Note: If period separators don't work for you, use commas instead.

Type:GeoCoordinates
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-HomePhone

The HomePhone parameter specifies the user's home telephone number.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Identity

The Identity parameter specifies the user that you want to modify. You can use any value that uniquely identifies the user. For example:

(Video) Rapidly Mass Creating User Mailboxes with Exchange Management Shell

  • Name
  • User principal name (UPN)
  • Distinguished name (DN)
  • Canonical DN
  • GUID
  • UserPrincipalName
Type:UserIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-IgnoreDefaultScope

This parameter is available only in on-premises Exchange.

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.

This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:

  • You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
  • You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Initials

The Initials parameter specifies the user's middle initials.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-LastName

The LastName parameter specifies the user's last name.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-LinkedCredential

This parameter is available only in on-premises Exchange.

The LinkedCredential parameter specifies the username and password that's used to access the domain controller specified by the LinkedDomainController parameter.

A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.

You can only use the LinkedCredential parameter with a linked user.

Type:PSCredential
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-LinkedDomainController

This parameter is available only in on-premises Exchange.

The LinkedDomainController parameter specifies the domain controller in the forest where the user account resides, if this user is a linked user. The domain controller in the forest where the user account resides is used to get security information for the account specified by the LinkedMasterAccount parameter.

This parameter is required only if you're connecting a linked user.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-LinkedMasterAccount

This parameter is available only in on-premises Exchange.

The LinkedMasterAccount parameter specifies the master account in the forest where the user account resides, if this user is a linked user. The master account is the account to which the user links. The master account grants access to the user. You can use one of the following values:

  • GUID
  • DN
  • Domain\Account
  • UPN
  • LegacyExchangeDN
  • SmtpAddress
  • Alias
  • $null

If you set this parameter's value to $null, you will unlink the account and convert the linked mailbox into a non-linked user mailbox. The mailbox won't retain the permissions previously set on it such as Send As, full access, folder, and calendar delegation.

This parameter is required only if you're connecting a linked user.

Type:UserIdParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Manager

The Manager parameter specifies the user's manager.

Type:UserContactIdParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-MobilePhone

The MobilePhone parameter specifies the user's primary mobile phone number.

Note: In Exchange Online, you can't use this parameter. Instead, use the Mobile parameter on the Set-AzureAdUser cmdlet in Azure AD PowerShell.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Name

The Name parameter specifies the unique name of the user. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Notes

The Notes parameters specifies additional information about the object. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Office

The Office parameter specifies the user's physical office name or number.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-OtherFax

The OtherFax parameter specifies the user's alternative fax number.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-OtherHomePhone

The OtherHomePhone parameter specifies the user's alternative home telephone number.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-OtherTelephone

The OtherTelephone parameter specifies the user's alternative telephone number.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Pager

The Pager parameter specifies the user's pager number.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PermanentlyClearPreviousMailboxInfo

This parameter is not available or functional in on-premises Exchange. It is only available in Exchange Online.

The PermanentlyClearPreviousMailboxInfo switch specifies whether to clear the Exchange Online mailbox attributes on a user. You don't need to specify a value with this switch.

Clearing these attributes might be required in mailbox move and re-licensing scenarios between on-premises Exchange and Microsoft 365. For more information, see Permanently Clear Previous Mailbox Info.

Caution: This switch permanently deletes the existing cloud mailbox and its associated archive, prevents you from reconnecting to the mailbox, and prevents you from recovering content from the mailbox.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online
(Video) Connect Exchange PowerShell

-Phone

The Phone parameter specifies the user's office telephone number.

Note: In Exchange Online, you can't use this parameter. Instead, use the TelephoneNumber parameter on the Set-AzureAdUser cmdlet in Azure AD PowerShell.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PhoneticDisplayName

The PhoneticDisplayName parameter specifies an alternate spelling of the user's name that's used for text to speech in Unified Messaging (UM) environments. Typically, you use this parameter when the pronunciation and spelling of the user's name don't match. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PostalCode

The PostalCode parameter specifies the user's zip code or postal code.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PostOfficeBox

The PostOfficeBox parameter specifies the user's post office box number.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PublicFolder

The PublicFolder switch is required to modify public folder mailboxes. You don't need to specify a value with this switch.

Public folder mailboxes are specially designed mailboxes that store the hierarchy and content of public folders.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RemotePowerShellEnabled

The RemotePowerShellEnabled parameter specifies whether the user has access to remote PowerShell. Remote PowerShell access is required to open the Exchange Management Shell or the Exchange admin center (EAC), even if you're trying to open the Exchange Management Shell or the EAC on the local Mailbox server. Valid values are:

  • $true: The user has access to remote PowerShell.
  • $false: The user doesn't have access to remote PowerShell.

The default value depends on the management roles that are assigned to the user.

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RemoveMailboxProvisioningConstraint

This parameter is available only in the cloud-based service.

This parameter is reserved for internal Microsoft use.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-ResetPasswordOnNextLogon

The ResetPasswordOnNextLogon parameter specifies whether the user must change their password the next time they log on. Valid values are:

  • $true: The user is required to change their password the next time they log on.
  • $false: The user isn't required to change their password the next time they log on. This is the default value.
Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SamAccountName

This parameter is available only in on-premises Exchange.

The SamAccountName parameter (also known as the pre-Windows 2000 user account or group name) specifies an object identifier that's compatible with older versions of Microsoft Windows client and server operating systems. The value can contain letters, numbers, spaces, periods (.), and the following characters: !, #, $, %, ^, &, -, _, {, }, and ~. The last character can't be a period. Unicode characters are allowed, but accented characters may generate collisions (for example, o and ö match). The maximum length is 20 characters.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-SeniorityIndex

The SeniorityIndex parameter specifies the order in which this user will display in a hierarchical address book. A user with a value of 2 will display higher in an address book than a user with a value of 1.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SimpleDisplayName

The SimpleDisplayName parameter is used to display an alternative description of the object when only a limited set of characters is permitted. Valid characters are:

  • a - z
  • A - Z
  • 0 - 9
  • space
  • " ' ( ) + , - . / : ?
Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SkipDualWrite

This parameter is available only in on-premises Exchange.

This parameter is reserved for internal Microsoft use.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-StateOrProvince

The StateOrProvince parameter specifies the user's state or province.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-StreetAddress

The StreetAddress parameter specifies the user's physical address.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-StsRefreshTokensValidFrom

This parameter is available only in the cloud-based service.

The StsRefreshTokensValidFrom specifies the date-time that the user's STS refresh tokens are valid from.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

(Video) How To Manage User Mailboxes In Exchange Using PowerShell

Type:DateTime
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-TelephoneAssistant

This parameter is available only in on-premises Exchange.

The TelephoneAssistant parameter specifies the telephone number of the user's assistant.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Title

The Title parameter specifies the user's title.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-UMCallingLineIds

This parameter is available only in on-premises Exchange.

The UMCallingLineIds parameter specifies telephone numbers or extensions that can be mapped to a Unified Messaging (UM)-enabled user. You can specify more than one telephone number for each user, separated by a comma. This parameter accepts digits less than 128 characters in length and may include an optional plus sign (+) preceding the numbers. Each UM-enabled user must have a unique UMCallingLineIds parameter value.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-UMDtmfMap

This parameter is available only in on-premises Exchange.

The UMDtmfMap parameter specifies the dual-tone multiple-frequency (DTMF) map values for the recipient. This allows the recipient to be identified by using a telephone keypad in Unified Messaging (UM) environments. Typically, these DTMF values are automatically created and updated, but you can use this parameter to make changes manually. This parameter uses the following syntax:

  • emailAddress:<integers>
  • lastNameFirstName:<integers>
  • firstNameLastName:<integers>

To enter values that overwrite all existing entries, use the following syntax: emailAddress:<integers>,lastNameFirstName:<integers>,firstNameLastName:<integers>.

If you use this syntax and you omit any of the DTMF map values, those values are removed from the recipient. For example, if you specify only emailAddress:<integers>, all existing lastNameFirstName and firstNameLastName values are removed.

To add or remove values without affecting other existing entries, use the following syntax: @{Add="emailAddress:<integers>","lastNameFirstName:<integers>","firstNameLastName:<integers>"; Remove="emailAddress:<integers>","lastNameFirstName:<integers>","firstNameLastName:<integers>"}.

If you use this syntax, you don't need to specify all of the DTMF map values, and you can specify multiple DTMF map values. For example, you can use @{Add="emailAddress:<integers1>","emailAddress:<integers2>} to add two new values for emailAddress without affecting the existing lastNameFirstName and firstNameLastName values.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-UserPrincipalName

This parameter is available only in on-premises Exchange.

The UserPrincipalName parameter specifies the logon name for the user account. The UPN uses an email address format: username@domain. Typically, the domain value is the domain where the user account resides.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-VIP

This parameter is available only in the cloud-based service.

The VIP parameter specifies whether the user is a priority account. Valid values are:

  • $true: The user is a priority account.
  • $false: The user is not a priority account.

For more information about priority accounts, see Manage and monitor priority accounts.

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-WebPage

The WebPage parameter specifies the user's Web page.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WhatIf

The WhatIf switch doesn't work on this cmdlet.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WindowsEmailAddress

The WindowsEmailAddress parameter specifies the Windows email address for this recipient. This is a common Active Directory attribute that's present in all environments, including environments without Exchange. Using the WindowsEmailAddress parameter on a recipient has one of the following results:

  • In environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is set to the value True for the recipient), the WindowsEmailAddress parameter has no effect on the WindowsEmailAddress property or the primary email address value.
  • In environments where the recipient isn't subject to email address policies (the EmailAddressPolicyEnabled property is set to the value False for the recipient), the WindowsEmailAddress parameter updates the WindowsEmailAddress property and the primary email address to the same value.

The WindowsEmailAddress property is visible for the recipient in Active Directory Users and Computers in the E-mail attribute. The attribute common name is E-mail-Addresses, and the Ldap-Display-Name is mail. If you modify this attribute in Active Directory, the recipient's primary email address is not updated to the same value.

Type:SmtpAddress
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.

Feedback

Submit and view feedback for

FAQs

How do I change users in PowerShell? ›

Method 1: Run a task as different user with Scheduled Tasks

When you start a PowerShell script, do it as here: Run PowerShell (or ps.exe) and add the script file with -file <script. ps1> as argument. Then, add the desired credentials by clicking the Change User or Group button.

How do I start Exchange PowerShell? ›

How to Open an Exchange PowerShell
  1. Open PowerShell and enter the following command: $LiveCred = Get-Credential.
  2. Enter the login credentials for Exchange when the window appears, and then click "OK."
  3. Enter the following command once the previous command has processed: Remove-PSSession $Session.

How to convert a shared mailbox to a user mailbox PowerShell? ›

There are two ways to convert the shared mailbox, we can use the Exchange Admin Center or PowerShell.
...
Convert Shared Mailbox to User Mailbox
  1. In the Exchange Admin Center, open the shared mailbox.
  2. Click on the tab Others.
  3. Select Convert to regular mailbox.
  4. Click Confirm on the prompt.
Aug 17, 2022

How do I get users in PowerShell? ›

Use Get-LocalUser PowerShell cmdlet to List All User Accounts. The Get-LocalUser PowerShell cmdlet lists all the local users on a device. Remember that Active Directory domain controllers don't have local user accounts.

How do I change the default user? ›

Click Start, right-click Computer, click Properties, and then click Advanced system settings. Under User Profiles, click Settings. The User Profiles dialog box shows a list of profiles that are stored on the computer. Select Default Profile, and then click Copy To.

How do I switch between users? ›

  1. From the top of the home screen, swipe down.
  2. At the bottom right, tap the user icon .
  3. Tap the user you want to switch to.

How do I connect to O365 Exchange PowerShell? ›

Connecting to Office 365(Exchange Online) via Powershell
  1. Open Powershell as administrator.
  2. Run command – Set-ExecutionPolicy Remotesigned.
  3. Type Y for yes.
  4. Run command – $UserCredential = Get-Credential.
  5. Sign in with O365 administrator account (user@company.com)
  6. Run command – Import-PSSession $Session.

How do I find my Exchange PowerShell? ›

Use the Get-ExchangeServer cmdlet to view the properties of Exchange servers. When you run the Get-ExchangeServer cmdlet with no parameters, it returns the attributes of all the servers in the Exchange organization.

How do I run Exchange PowerShell as administrator? ›

Make sure that the “Administrator: Windows PowerShell” appears in the title bar. If “Windows PowerShell” appears in the title bar instead, right click on the PowerShell icon in the bottom bar and click on “Run as Administrator.”

How do I change my shared mailbox to a user mailbox? ›

Convert a shared mailbox back to a user's (private) mailbox

Go to the Exchange admin center. Select Recipients > Shared. Select the shared mailbox. Under Convert to Regular Mailbox, select Convert.

Can a shared mailbox send as a user? ›

Users with permissions to the group mailbox can send as or send on behalf of the mailbox email address if the administrator has given that user permissions to do that. This is particularly useful for help and support mailboxes because users can send emails from "Contoso Support" or "Building A Reception Desk."

How do I assign a user to a shared mailbox? ›

In the admin center, go to the Teams & Groups > Shared mailboxes page.
  1. On the Shared mailboxes page, select + Add a shared mailbox. Enter a name for the shared mailbox. ...
  2. Select Save changes. ...
  3. Under Next steps, select Add members to this mailbox. ...
  4. Select the +Add members button. ...
  5. Select Close.
Oct 26, 2022

How do I add a user in PowerShell? ›

Create new local user account with PowerShell

Search for PowerShell, right-click the top result, and select the Run as administrator option. Type the password for the new Windows 10 account and press Enter. In the command, change NEW_ACCOUNT_NAME for the account name and USER_FULL_NAME for the user's full name.

How can I get a list of all users? ›

Open Computer Management, and go to “Local Users and Groups -> Users.” On the right side, you get to see all the user accounts, their names as used by Windows behind the scenes, their full names (or the display names), and, in some cases, also a description.

How do I list all users in AD PowerShell? ›

To get the domain user list, you can use the Get-ADUser command. To run this command you need to make sure that you have the RSAT (Remote Server Administration Tools) installed on the computer. The above command will get all users from the active directory domain.

What is default user profile? ›

The default profile is a template profile that is used when a user logs on to a Windows computer for the first time. The default profile can be customized by the image creator.

How do I switch users without signing in? ›

Here are three quick ways to switch between multiple user accounts without logging off and terminating running processes & apps.
  1. Switch user via the Shut Down Windows dialog box.
  2. Switch user via the CTRL+ALT+DEL keyboard shortcut.
  3. Switch user via the user icon in Start Menu.
Aug 21, 2019

What is C :\ users all users? ›

The folder C:\Users\All Users is a symbolic link to C:\ProgramData . They're two names for the same folder. It is there because many older programs used hard-coded paths to access the folder which doesn't exist any more.

Can two users have the same primary switch? ›

You can have one primary console at a time for your Nintendo Account. The first Nintendo Switch console you use to connect to Nintendo eShop on Nintendo Switch will become your primary console. While using the primary console, any user account on the console can play the downloadable content you have purchased.

How do you have 2 users on one computer at the same time? ›

To add a user, click the Start button, select Settings and then choose Accounts. On the Accounts screen, choose Family & other users from the menu on the left. To set up an account for a co-worker, go to the “Other users” section and click Add someone else to this PC.

How do I add Exchange Online to PowerShell? ›

Get All Exchange Online Cmdlets
  1. Get Credentials to connect to Exchange Online.
  2. Create a new Microsoft 365 PowerShell session.
  3. Import the new Exchange Online PowerShell session.
  4. Run PowerShell cmdlets for Exchange Online.
  5. Remove the session.
Dec 22, 2022

How do I find my Exchange account settings? ›

Tap Settings > Mail > Accounts, then select your Exchange account. You can also set up automatic out-of-office replies, and change how often you want Mail to sync. To change advanced settings, tap your account name to change settings like SSL and S/MIME.

How do I find my Exchange username? ›

What Is My Username And Primary Email Address For My Exchange Mailbox?
  1. Click the display name of the user.
  2. On the user settings page, click the display name once again to see the username in the Edit User Info window.
May 6, 2022

How do I find my Exchange server domain and username? ›

Frequently, the account ID is the part of your e-mail address before the "@" symbol, and the domain is the part of your e-mail address after the "@" symbol. However, this is not always true. For some accounts, your user name is your complete e-mail address.

How do I make my user an Exchange administrator? ›

Procedure
  1. Click Start > Programs > Microsoft Exchange > System Manager. ...
  2. Click Action > Delegate control. ...
  3. On the Users or Groups page, click Add.
  4. In the Delegate Control window, click Browse. ...
  5. From the Role list, select Exchange Full Administrator, and then click OK.
  6. Click Next, and then click Finish.

How do I set up Exchange admin center? ›

Experience the new Exchange admin center

Try the new Exchange admin center using the URL https://admin.exchange.microsoft.com and sign in using your credentials. You can also continue to access the Classic Exchange admin center using the URL Classic Exchange admin center and sign in using your credentials.

How do I enable administrator account in PowerShell? ›

Using Windows PowerShell

Open the context menu with [Windows] + [X]. Click on “Windows PowerShell (Administrator)”. Enter “net user administrator /active:yes”. The administrator account is now active.

What is the difference between shared mailbox and user mailbox? ›

The main difference between a user mailbox and a shared mailbox is that the shared mailbox is associated with a disabled user. Shared mailbox is mainly used to allow login access for multiple users. It is the same when multiple users use a user mailbox and a shared mailbox at the same time.

How to convert mailbox to shared mailbox in Office 365 PowerShell? ›

Convert User Mailboxes to Shared Mailboxes in Office 365
  1. Connect to Office 365. Connect to Office 365 from an elevated PowerShell console… ...
  2. Convert to Shared Mailbox. Convert mailbox and set size quota. ...
  3. Assign Permissions. Assign permissions to specific group to access shared mailbox… ...
  4. Remove Office 365 License.
Feb 14, 2014

Is a shared mailbox the same as a group mailbox? ›

Group emails function as distribution lists for teams, while shared mailboxes serve as an email management platform through which teams can address emails collaboratively. When one person needs to share email information with multiple people, a group email offers the greatest advantage.

How do I get permission to send an email from a shared mailbox? ›

On the Mail tab, select Manage mailbox permissions. Next to Send as, select Edit. Select Add permissions, then choose the name of the person who you want this user to be able to send as. Select Add.

Can you send emails from a shared mailbox without a license? ›

Shared mailboxes usually don't require a license.

Can a user without a mailbox access a shared mailbox? ›

Both can have different users granted access. A user can not access a "Shared Mailbox" without a primary account to logon to. Shared Mailboxes do not have their own logons.

How do I add a user to a shared outlook mailbox? ›

  1. Open Outlook.
  2. In the Navigation Pane, locate the shared mailbox and expand it using the arrow to the left of its name.
  3. Right-click on Inbox and select Properties….
  4. Select the Permissions tab.
  5. Select Add.
  6. Enter the name of the person whom you want to have access and then select their name in the search results list.

How do I add a user to a shared network? ›

Step 3 – Granting Specific Users Access
  1. Open Windows Explorer and navigate to the shared folder.
  2. Right click and select Properties.
  3. Click on the Security tab and click Edit.
  4. Click Add and then type the username you wish to grant access.
  5. Click OK.
Mar 29, 2022

How do I add a user to my mailbox? ›

Create user mailboxes
  1. In the EAC, go to Recipients > Mailboxes.
  2. Click New ( ) ...
  3. On the New user mailbox page, configure the following settings. ...
  4. You can click Save to create the mailbox and the associated Active Directory user account, or you can click More options to configure the following additional settings:
Mar 21, 2022

How do I add users to Powerapps? ›

Create a user account in the Microsoft 365 admin center. Be sure to assign a license to the account. In the Power Platform admin center, select an environment, and go to Settings > Users + permissions > Users. Select Enabled Users, and then select a user's full name.

How do I add a user account? ›

Add or update users
  1. Open your device's Settings app.
  2. Tap System. Multiple users. If you can't find this setting, try searching your Settings app for users .
  3. Tap Add user. OK. If you don't find "Add user," tap Add user or profile User. OK. ...
  4. Enter a name for the new user.

How do I add a user profile? ›

Select Start > Settings > Accounts and then select Family & other users. (In some versions of Windows you'll see Other users.) Next to Add other user, select Add account. Select I don't have this person's sign-in information, and on the next page, select Add a user without a Microsoft account.

Which command can list all users? ›

List Users with cat Command. The cat command provides a straightforward way to list the contents of the /etc/passwd file. The system outputs the entire file with all the users on the system.

Which command is used to get all users? ›

Users command is used to print the user name who are all currently logged in the current host.

How do I get AD user attributes in PowerShell? ›

To use PowerShell to get an AD user object attributes, we will be using the Property parameter. The Property parameter accepts one or more comma-separated attributes to show with the output. Below we will see an example of using Get-ADUser to find all properties for a specific user account.

How do I see all active users in Active Directory? ›

Searching for Active Directory user accounts in ADUC

Click Find Now and then sort the 'Type' column until 'User' is displayed. You will then see all your true user accounts.

How do I get a list of LDAP users? ›

On the navigation tree, select Device User > LDAP Users from the navigation tree. The list displays all LDAP users and includes the following columns: Account Name—Account name of the LDAP user. Device User Group—Device user group to which the LDAP user belongs.

How do I open Windows PowerShell as a different user? ›

If you are logged in as the local admin, start Powershell with RunAsUser, or through: Shift+Right-click > Run as different user > Domain admin.

How do I switch users in Command Prompt? ›

Open Command Prompt or PowerShell in your Window 10 PC. Now, type in “tsdiscon” (without quotes) and press 'Enter'. The 'tsdiscon' command will take you to the lock screen. From there, you can go through the usual process to log into any user account on the PC.

How do I change user in Command Prompt? ›

Switch user accounts from the Command Prompt
  1. Quit explorer.exe.
  2. Open Command Prompt.
  3. Navigate to C:\WINDOWS\system32.
  4. Enter the following command: runas /user:*computer name\*account name explorer.exe.
Aug 17, 2007

How do I change users in control panel? ›

Here's how to change UAC settings (Windows 10).
  1. On your keyboard, press Windows+R to open the Run window.
  2. Type Control Panel. Then select OK.
  3. Select User Accounts. Then select User Accounts (Classic View).
  4. Select Change user account control settings. ...
  5. Move the slider. ...
  6. Restart the computer.
Dec 1, 2022

How do I change administrator in PowerShell? ›

Step 1: Open the Command Prompt, and type the PowerShell as a command, then press Enter key. Step 2: Now, the command prompt will turn to Windows PowerShell. Step 3: Type the command start-process PowerShell -verb runas and press "enter" key. Step 4: It will bring up an elevated Windows PowerShell as an administrator.

How do I change the default PowerShell in Windows? ›

Please change powerShell version in windows 11, follow these steps:
  1. Open powerShell and go to setting by clicking down arrow.
  2. in Profiles tab (left side in menu) choose Windows PowerShell.
  3. edit the Command Line to powerShell Directory Like C:\Program Files\PowerShell\7\pwsh.exe.
  4. Save settings.
Mar 2, 2021

How do I set PowerShell as default administrator? ›

Always open PowerShell as administrator

Click the menu button next to the new tab option and select the Settings option. Under the “Profiles” section, click on PowerShell. Turn on the “Run this profile as Administrator” toggle switch to run PowerShell elevated automatically. Click the Save button.

What is command for changing user information? ›

usermod command or modify user is a command in Linux that is used to change the properties of a user in Linux through the command line. After creating a user we have to sometimes change their attributes like password or login directory etc. so in order to do that we use the Usermod command.

How do I set up user account control? ›

Adjust protection level
  1. Go to Start and open Control Panel.
  2. Select System and Security.
  3. Under Security and Maintenance, select Change User Account Control settings.
  4. Move the slider to one of the following levels: ...
  5. Select OK to save your changes.
  6. Select Yes when prompted to confirm the changes.
Dec 15, 2020

Why can't I switch users on my computer? ›

From the Start menu, click on your profile icon and select the user account that you want to switch to from the drop-down menu. Press the Ctrl + Alt + Del keyboard shortcuts and select Switch User. Press the Win + L keyboard shortcut to get to the lock screen and select the user account that you want to access.

What are the 4 user account control settings? ›

There are four UAC settings that you can choose from:
  • Always notify. Select this setting if you: ...
  • Notify me only when programs try to make changes to my computer. Select this setting if you: ...
  • Notify me only when programs try to make changes to my computer (do not dim my desktop) Select this setting if you: ...
  • Never notify.

Videos

1. Share calendars in Exchange Online using PowerShell | #PowerShell #ExchangeOnline #O365
(TechTrip)
2. How to connect Exchange Online via PowerShell
(ITeePK)
3. How To Manage Resource Mailboxes In Exchange Using PowerShell
(TechSnips by ATA Learning)
4. Basic PowerShell commands for Shared Mailboxes in Exchange Online #Microsoft #PowerShell
(TechTrip)
5. How To Allow A User To Send As Another Identity In Exchange Using PowerShell
(TechSnips by ATA Learning)
6. Microsoft 365 Tutorial How to log into Exchange PowerShell
(Robert McMillen)
Top Articles
Latest Posts
Article information

Author: Margart Wisoky

Last Updated: 11/25/2022

Views: 5807

Rating: 4.8 / 5 (78 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Margart Wisoky

Birthday: 1993-05-13

Address: 2113 Abernathy Knoll, New Tamerafurt, CT 66893-2169

Phone: +25815234346805

Job: Central Developer

Hobby: Machining, Pottery, Rafting, Cosplaying, Jogging, Taekwondo, Scouting

Introduction: My name is Margart Wisoky, I am a gorgeous, shiny, successful, beautiful, adventurous, excited, pleasant person who loves writing and wants to share my knowledge and understanding with you.